Amprobe’s Model TR200-A takes both temperature and relative humidity readings in one compact size unit. Use the included Amprobe software for recording measurements to your personal computer. Set up these parameters for recording: sample interval timing, start/stop, date and time, hi/lo alarm threshold, unit selection, and number of memory points.
- Instrument for indoor air quality monitoring
- Wall mountable
- Digital display
- Air Temperature displays in Celsius or Fahrenheit
- Temperature / RH in one model
- Offers visible LEDs warnings to monitor IAQ condition
- Small size design with RS232 interface
- Memory points selection : 1000, 2000, 4000, 8000, 12000, 16000
Specification:
| Display | 3¾ digit liquid crystal display (LCD) with a maximum reading of 1999 |
| Sampling points | 1K / 2K / 4K / 8K / 12K / 16K |
| Resolution | Temperature 0.1°C / 0.1°F RH Resolution 0.1% |
| LED | Red: Hi, LO Alarm; Yellow: Record |
| Low battery indication | The “Batt” is displayed when the battery voltage drops below the operating level |
| Auto power off | Approx 10 minutes |
| Operating environment | 14 °F to 140 °F, 0 to 100 %RH |
| Storage temperature | -40 °F to 185 °F, 0 to 100 %RH |
| Measurement ranges | Temperature Internal sensor -40 °F to 185 °F External probe -40 °F to 212 °F Relative Humidity 0.0 to 99.9% |
| Accuracy | Temperature ±1°F (-4°F to 122°F); ±1.2°F for all others Relative Humidity ±3% at 77°F; 5% for all others |
| Sensor | Silicon photodiode and filter |
| Altitude | 2000 m, indoor operation |
| Power supply | 1 X 3V coin battery IEC-CR2032 |
| Battery life | 2-years with 7200-sec sampling rate |
| Dimensions | 2.95 x 2.16 x 0.9 in |
| Weight | 0.044 lb |
| IP Rating | IP65 |
