Wika Model CTI5000 Infrared Calibrator

Description

Aim – shoot – test
For the calibration of infrared thermometers above ambient temperature, the model CTI5000 is suitable up to 500 °C [932 °F]. Due to its stability, the new portable infrared calibrator is particularly suited to the calibration of infrared hand-held thermometers.

The black body has a large diameter so that a wide variety of infrared thermometers can be tested, no matter which lenses are fitted. The emissivity is fixed at 0.95 and the temperature can be controlled in steps of 0.1 °C. To check the black body, there is a bore located directly behind the surface so that the measurement can be made with contact and the quality monitored.

Compare

Applications

  • Testing and calibration of non-contact temperature measuring instruments
  • Heating source for works laboratories for the calibration of infrared thermometers
  • Also suitable for on-site calibration

Special Features

  • Testing of infrared thermometers across a wide temperature range; 50 … 500 °C [122 … 932 °F]
  • Large surface area of the black body (∅ 57 mm [2.24 in]) for all types of pyrometers
  • Bore to accept a reference sensor
  • Low weight and compact design
  • Simple operation

Description

Aim – shoot – test
For the calibration of infrared thermometers above ambient temperature, the model CTI5000 is suitable up to 500 °C [932 °F]. Due to its stability, the new portable infrared calibrator is particularly suited to the calibration of infrared hand-held thermometers.

The black body has a large diameter so that a wide variety of infrared thermometers can be tested, no matter which lenses are fitted. The emissivity is fixed at 0.95 and the temperature can be controlled in steps of 0.1 °C. To check the black body, there is a bore located directly behind the surface so that the measurement can be made with contact and the quality monitored.