Amprobe ACD-10 Plus Digital Clamp Meter

Purchase this product now and earn 533 Points!

RM533.00 RM533.00


The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (only 0.4″/10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm).

It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.


  • Measures AC and DC voltage to 600V and AC current to 600A to handle residential/commercial and small industrial applications
  • Thin jaws, only 10mm (0.4″) thick make it easier to maneuver between tightly packed conductors
  • Measures frequency, resistance, and capacitance
  • Features continuity beeper to quickly find opens and shorts
  • Accommodates conductors up to 1.0″ (25mm) in diameter
  • Auto ranging saves time by instantly selecting correct range
  • Auto power off to conserve battery life
  • Rubber over-molded case absorbs shock
  • Includes test leads, battery (installed), soft carrying pouch, and users manual


AC Voltage4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current40.00 A, 400.0 A, 600 A
Resistance400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ
Capacitance500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Accommodates conductorsup to 1.0″ (25 mm) in diameter


Display:3-3/4 digits 4000 counts LCD display
Update rate:3 per second nominal
Operating temperature:°C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude:Operating below 2000m; Indoor use
Storage temperature:-20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient:nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery:Below approx. 2.4V
Power supply:3V coin battery IEC-CR2032
Power consumption:2.8 mA typical except that 3.3 mA typical for ACA function
APO timing:Idle for 30 minutes
APO consumption:5 µA typical
Jaw opening conductor diameter:max 26 mm
Special features:30ms Max Hold; Data Hold; Relative Zero mode
Weight1 kg