- Easier mode selection and higher durability of the selection mechanism
- 3 Stage power selection
- Independent off switch for LED job light
- Built-in LED light with pre-glow and afterglow functions illuminates the work area
- Phosphorescent bumper glows in dark places
- 4 Operation Modes (Impact Driver, Hammer Drill, Drill, Screwdriver) and Teks Screw Mode selection
Specification:
| Capacity | Steel: 10 mm (3/8″) Wood: 21 mm (13/16″) Masonry: 8 mm (5/16″) |
| Impacts Per Minute (IPM) | Impact-driver mode (Hard: 0-3,200 | Medium: 0-2,400 | Soft: 0-1,200) Hammer drill mode (Hi: 0 – 32,400 | Lo: 0 – 8,400) |
| No Load Speed (RPM) | Hard: 0 – 2,700 | Medium: 0 – 2,200 | Soft: 0 – 1,300 Drill Mode High: 0 – 2,700 | Low: 0 – 700 Hammer Drill Mode High: 0 – 2,700 | Low: 0 – 700 Screwdriver Mode High: 0 – 1,100 | Low: 0 – 300 |
| Max Fastening Torque | Impact-driver mode : 150 N·m (1,330 in.lbs.) Drill Mode Hard: 22 N·m | Soft: 13 N·m |
| Dimensions (L x W x H) | 171 x 79 x 250 mm (6-3/4″ x 3-1/8″ x 9-7/8″) |
| Net Weight | 1.5 – 1.9 kg (3.4 – 4.1 lbs.) |
Standard equipment:
- Belt Clip
Available options:
- RFE: 1x Rapid Charger, 2x 3.0Ah Battery
- Z: Without Charger, Battery & Carrying Case
