Chat on WhatsApp
Testo Thin Humidity Probe (Ø 4 mm) - for Material Moisture
Share productSKU:
Click to copyEquilibrium moisture content is ideally measured in a bore hole in the material. The thin humidity probe with a probe shaft diameter of 4 mm (connected to an appropriate measuring instrument) is go...
Contact us for pricing
This product requires a custom quote
In Stock
Quantity
Add to wishlist
Description
Equilibrium moisture content is ideally measured in a bore hole in the material. The thin humidity probe with a probe shaft diameter of 4 mm (connected to an appropriate measuring instrument) is good to use here, so as to keep the bore hole as small as possible. It should be protected against contamination by a PTFE cap during measurement. The bore hole can easily be sealed with adhesive modelling clay.
The attached measuring instrument (testo 635) automatically calculates the material moisture based on the measured equilibrium moisture content and shows this in the display. The material moisture calculation is available for the following materials: concrete, high-insulation brick, solid brick, hard wood, soft wood, aerated concrete, particle board, calcium sulphate flowing screed, cement flowing screed and lime sand brick.
Additional Details
Thin humidity probe (Ø 4 mm) with PTFE protective cap and adhesive modelling clay (4 items), including fixed cable.
Additional Information
Length
15 cm
Width
3 cm
Height
3 cm
Weight
0.15 kg
Specifications
General technical data
Diameter probe shaft
4 mm
Length probe shaft
60 mm
Humidity - Capacitive
Measuring range
0 to +100 %RH
Accuracy
±0.15 %RH/K (k=1) / long-term stability: ±1 %RH / year / *The sensor accuracy corresponds to the system accuracy. / ±2 %RH at +25 °C (+2 to +98 %RH)
Temperature - NTC
Measuring range
0 to +40 °C
Accuracy
*Please also take into account the device uncertainty. / ±0.2 °C
Equilibrium moisture content is ideally measured in a bore hole in the material. The thin humidity probe with a probe shaft diameter of 4 mm (connected to an appropriate measuring instrument) is good to use here, so as to keep the bore hole as small as possible. It should be protected against contamination by a PTFE cap during measurement. The bore hole can easily be sealed with adhesive modelling clay.
The attached measuring instrument (testo 635) automatically calculates the material moisture based on the measured equilibrium moisture content and shows this in the display. The material moisture calculation is available for the following materials: concrete, high-insulation brick, solid brick, hard wood, soft wood, aerated concrete, particle board, calcium sulphate flowing screed, cement flowing screed and lime sand brick.
Additional Details
Thin humidity probe (Ø 4 mm) with PTFE protective cap and adhesive modelling clay (4 items), including fixed cable.
