Seagull TCH Type Horizontal Plate Clamp

The TCH horizontal plate clamps have been specifically designed to be used, in pairs, for the transportation of plate bundles as well as single plates with a minimum thickness of 5mm.

A pair of clamps used with a two legged chain sling are suitable for small plates up to 1500mm in length. It is recommended to use two pairs in conjunction with a spreader beam for handling of larger plates. These units are supplied as standard with a smooth jaw. There is also the option of hardened steel teeth for special applications.

NB: The top angle between the chain / rope legs must not exceed 45 degrees from vertical.

Inspection, Care & Use

• DO NOT side load TCH clamps.
• DO NOT use on a quad sling. When lifting long plates, use a beam or spreader bar that has a double leg sling at each end and connect clamps to the slings.

Specifications

Code	Model	Jaw Opening (mm)	Load Capacity (kg)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	Net Weight (kg)
30251	TCH1T	5~32	1000	245	110	44	100	32	6
30252	TCH2T	5~32	2000	220	88	73	100	50	5.4
30253	TCH4T	5~50	4000	265	118	92	100	64	10
30254	TCH6T	5~75	6000	350	172	130	130	90	24.5
30255	TCH8T	5~75	8000	350	172	130	130	90	26.5
30256	TCH10T	5~100	10000	470	215	130	150	114	48
30257	TCH10TL	50~150	10000	510	215	130	150	114	52